Mitutoyo’s LCD Plan Apo NIR BF Series objective lens series correct for chromatic aberration throughout the visible light spectrum and the near infrared region to focus visible through near infrared (NIR) wavelengths onto the same plane for sharpest possible image. Optimized for brightfield observations and laser microscopy applications in the visible and NIR spectrum.  They feature an ultra-long working distance optics, anti-reflective coatings and enhanced functions to increase transmissivity in the near infrared region. The workpiece image can be focused within the focal depth whenever the wavelength is from the visible range (λ= 480nm) up to near-infrared range (λ= 1800nm), making these objectives ideal for laser repair applications. However, when the wavelength used exceeds 1100nm, the focusing position may deviate slightly from the position in the visible range due to changes in glass dispersion and refractive index.

The LCD Plan Apo BF Series objective lenses are specially designed for use on LCDs with a glass cover.

Applications

• CNC Vision Measuring Machines equipped with microscope systems and covering with a wide range of requirements and specifications to reduce inspection labor costs while raising throughput, enable more accurate measurements, and improve the working environment by eliminating difficult tasks
• Non-contact visual CMMs for high inspection speed of microscopic detail,
• Microspectroscopes, to measure reflective optical characters in very small areas,
• Interferometers that use a single or pair of objective lens microscopes; Fizeau interferometer, Michaelson interferometer, Linnik interferometer, 
• Microscope-equipped lasers, used to peel off a semiconductor's passivation layer to enable probing and for laser processing repair of defects in semiconductor and masks

Typical Optical System for Laser Processing:

• Semiconductor sub-micron level inspection for Defect Analyzer (Prober Station) and detection of faint light emitted by leaks.

Features

• The Finescope 70 Microscope Series is an infinity-corrected optical system that uses both the 378- Series objective lens and the MT Series imaging lens (tube lens) to generate images with aberration correction performed independently on the objective lens and imaging lens. This allows these products to be used independently or as part of an expandable system, with the imaging lens set as needed for customer applications.
• Mitutoyo LCD Plan UV microscope objective lenses are optimized for brightfield observations and laser microscopy applications in the ultraviolet and visible spectrum. To maintain transmissivity into the ultraviolet region, the typical optical glass has been replaced with fluorite and synthetic quartz as lens materials, with an anti-reflective (AR) UV/Visible coating applied for maximum optical performance. 
• Ergonomic design and simple controls provide an ease of operation and user comfortability, 
• High transmittance in the UV spectrum,
• Long working distance, specially designed to correct for LCDs with 0.7mm thick cover glass.
• Higher magnification, and large numerical aperture for sub-micron resolution.  

• Apochromatic (Apo) objectives feature corrected color aberration in a wide part of the visible range.  This has been achieved by selectively using anomalous dispersion glass and ultra-low dispersion glass with a low refractive index. The wavelength-based refractive index in these types of glass differs from that of ordinary optical glass. Aberrations tend to occur for an objective lens with a longer working distance, and chromatic aberration is especially likely to occur. This correction of lateral chromatic aberration and astigmatism results in the LCD Plan Apo NIR Series products capability to provide the sharpest possible image.  

Chromatic Aberration

• The Finescope 70 Microscope Series is an infinity-corrected optical system that uses both the 378- Series objective lens and the MT Series imaging lens (tube lens) to generate images with aberration correction performed independently on the objective lens and imaging lens. This allows these products to be used independently or as part of an expandable system, with the imaging lens set as needed for customer applications. 
• Ergonomic design and simple controls provide an ease of operation and user comfortability, 
• Higher magnification, and large numerical aperture for sub-micron resolution.  

Specifications

Dimensions

 ---