combines a 5 inch (127 mm) optical-grade glass lens within a uniform ring of high-efficiency, flicker-free LEDs to deliver bright, even, virtually shadow-free illumination for precision tasks. This professional bench magnifier in designed for daily use in production and lab environments, and is engineered to provide crisp, detail viewing at typical working distances. Choose a 3-diopter (1.75×) or 5-diopter (2.25×) primary lens and add snap-on secondary STAYS® lenses (4/6/10 Diopter) when higher magnification is required.

The internal-spring, parallel three-pivot K-arm provides long reach, positions smoothly, and stays where you position it—no drift, no knobs to constantly tighten—so operators can focus on the task, not the lamp. Standard delivery includes an edge clamp, but other mounts are available to match the application and workstation. The neutral-white 4000K LEDs with CRI 80 reveal surface defects without color cast, user controls provide step dimming with an energy-saving 4/9-hour auto shut-off.  This rugged, all-metal design (aluminum head, steel arm) is built for reliability while supporting all-day comfort and 5S practices, while the 5 year warranty puts tight control on the total cost of ownership.

Applications

Laboratory & R&D

• • Sample prep, surface feature review, small-component assembly and training stations
  • Comfortable viewing that reduces eye strain during documentation and review

Industrial QA/QC

• • Cosmetic and dimensional checks with even illumination over reflective surfaces
  • Repeatable positioning for standardized inspection cells

Electronics Manufacturing & Rework

• • Hand soldering and SMD/PCB inspection with uniform ring lighting
  • Fine-pitch solder inspection and touch-up under neutral-white lighting
  • Connector, PCB, and wire harness verification checks with stable, shadow-free viewing
  • Mechanical assemblies validation
  • Parts conformity evaluation; reading fine markings

Medical, Dental & Device Assembly

• • Assembly of small instruments and components requiring bright, color-accurate lighting
  • Visual checks of molded parts, castings, and device sub-assemblies

Precision Assembly & Repair

• • Watchmaking/jewelry, plastics finishing, and small mechanical assemblies where operator comfort matters.

Features

• Optimized 5-inch (127 mm) optical glass lens with clear, crisp imaging for detailed inspection tasks,

• Available in 3 diopter (1.75x) or 5 diopter (2.25x) magnification options; secondary lens accessories boost magnification to 15 diopter (see below),

• Full-circle, flicker-free high-performance LED array delivers uniform, shadow-free illumination across the viewing area for consistent visual decisions,

• Three-step dimmable illumination (100%-50%-0%) adapts to varied tasks and ambient conditions for operator comfort,

• Automatic shut-off after 4 or 9 hours to conserve energy and increase useful lifetime,

• Modern and efficient electronics are low heat output with silent operation to support comfortable extended use.

• Precision-engineered, internally spring-balanced arm allows a wide reach with nearly effortless vertical, horizontal, and lateral positioning - holding in place without drifting,

• Robust all-metal construction withstands heavy daily use in demanding workspaces,

• Reliable performance over 50,000+ hours of LED lifespan,

• Flexible mounting with standard edge clamp, or add optional surface mounts, roller base or weighted base,

• Includes cloth lens cover to protect the lens from dust and to prevent the magnifying lens from inadvertently overheating samples, benchtops, or starting a fire,

Specifications

Dimensions

• Extra AH-Type Edge Mount Clamp Bracket
• Alternate clamps and integrated table mounts (specify bench thickness/edge type)
• Weighted FE-Base For use with 30" LFM, SKU# LUXO 6001106703
• Rolling Floor Stand, For 30" arms only

Documentation

• Luxo LED Magnifiers Installation & Maintenance Manual (PDF)
• Warranty Terms (PDF)

FAQs

• Should I choose 3-diopter or 5-diopter?
  Choose 3 D (1.75×) for more working clearance (13.0 in/330 mm). Choose 5 D (2.25×) for finer detail at a shorter working distance (8.0 in/200 mm).
• How bright is the LFM G2?
  It delivers approximately 700 lm and ~1,750 lux at a 13 in (330 mm) focal distance, with step dimming at 100/50/0.
• Which lens should I choose—3 D or 5 D?
  Pick 3 D (1.75×) for longer working distance (~13") and a larger field of view; choose 5 D (2.25×) when you need more magnification and can work closer (~8").
• Can I increase the magnification later?
  Yes. Optional STAYS clip-on lenses (4 D/6 D/10 D) attach to the primary glass lens to reach higher total magnification without replacing the main lens.
• Does it include a clamp and power supply?
  Yes. A standard edge clamp is included, along with a plug-in power supply and quick connector.
• Will the arm hold its position?
  The internal-spring, parallel three-pivot arm is engineered for stable, drift-free positioning across its reach.
• What about safety and care?
  Avoid direct sun on the lens; use the protective cover when not in use. Clean with neutral detergent (pH 7) and a soft cloth; avoid solvents.
• Is the lighting dimmable?
  The LFM LED G2 provides 0-50-100% step dimming and automatic shut-off (4 or 9 hours) to manage brightness and energy use.
• Is there an ESD-safe version?
  No, the LFM LED G2 is a standard model. For ESD-controlled areas, consider Luxo KFM LED-ESD or Wave LED-ESD.

Warranty

Vision LUXO provides a 5-year warranty against manufacturing and material defects when used as specified. If a defect occurs, LabgearUSA will coordinate troubleshooting and, if needed, RMA and replacement per the manufacturer’s terms. Excludes normal wear and misuse. Provide your order number and serial details to start a claim.

The Luxo LFM G2 LED Magnifier includes a robust 5-year manufacturer's warranty covering all major components and workmanship. In the unlikely event of a defect or operational issue, simply contact our dedicated North American product support team at support@labgearusa.com or call our toll-free service line. Most service cases are resolved with fast, factory-authorized support—ensuring minimal downtime and maximal peace of mind. Warranty applies only to original purchaser and excludes accidental damage, abuse, or cosmetic wear.

Ordering

Select your ideal configuration and click Add to Cart.  Configure in 4 quick steps:

1. Pick the color and the arm length that fits your bench and reach.
2. Choose a 3D or 5D lens for your preferred working distance and detail level. Select the 3 diopter lens (1.75X magnification, 13.0 in/330 mm working distance) for best tool access or 5 diopter (2.25X magnification, 8.0 in/200 mm working distance) for finer detail.
3. Select your mounting option – Stay with the standard AH-type clamp or add an alternative mount, mobile trolley (roller base) or weighted base.
4. Add a clip-on secondary lens (4D, 6D, 10D) to easily alternate between coarse checks and fine inspection.

Rolling out to multiple stations?  For questions, tailored configurations, or volume pricing, contact Labgear’s customer support team for expert guidance.  Rapid worldwide shipping and expert support ensure your equipment arrives promptly and is fit for immediate integration into your workspace.