is a professional rectangular LED magnifier designed for demanding inspection and assembly work where image clarity, ergonomics, and reliability directly affect throughput and quality. Two high-output LED modules deliver intense, even illumination across a large 6.75 x 4.5 inch glass lens, with roughly 4600 lux at an 11 inch working distance and a neutral 4000 kelvin color temperature. Users can choose 3.5 diopter or 5 diopter primary lenses, 30 inch or 45 inch K-arms, and standard, ESD safe, or UV inspection variants to match their process requirements. A fully enclosed neck, internal spring-balanced arm and selectable left or right lighting provide precise, drift-free positioning without knobs to tighten.

Wave-LED is a modern alternative to legacy fluorescent magnifiers and bulky microscopes, delivering bright, low-maintenance LED lighting, long service life, and an industrial-grade mechanical platform that stays where it is placed.  

Applications

Electronics assembly, inspection, and rework

Wave-LED is particularly well suited for electronics manufacturing, service, and repair environments where components are small, densely packed, and sensitive to heat and static. The rectangular lens gives a wide viewing area along a PCB, while selectable left or right lighting creates gentle shadows that reveal solder fillets, lifted leads, and other subtle defects.

• Visual inspection of printed circuit boards, solder joints, and rework areas.
• Fine-pitch assembly, rework under magnification, and connector inspection.
• Use of ESD safe Wave LED variants in EPA zones to help control electrostatic discharge.
• Use of UV variants to check conformal coating coverage and adhesive cure patterns.

Medical device, life science, and precision manufacturing

For medical device production, analytical instruments, and precision mechanical parts, the Wave-LED offers a bright, color-stable view that supports dimensional checks and cosmetic inspection without eye strain. The stable K-arm allows operators to position the lens over fixtures, trays, and complex assemblies while keeping hands free.

• Inspection of molded and machined components for scratches, burrs, and contamination.
• Verification of laser markings, graduations, and identification features.
• Assembly and inspection of small mechanical subassemblies and fluidic components.
• Documentation tasks when paired with camera accessories such as BenchKam systems.
• 

Cosmetics, dental, and low-vision workstations

The fully enclosed neck and smooth outer surfaces make Wave-LED easy to keep clean in cosmetology, dental, and spa environments where foreign object debris and hygiene are critical. The rectangular viewing field allows users to see an entire area of interest without constantly repositioning the arm.

• Cosmetic treatments and dermal inspection requiring bright, neutral white light.
• Dental laboratories and prosthetics finishing where fine surface detail must be visible.
• Low-vision workstations that benefit from a large, bright field of view and adjustable light levels.
• General grooming and aesthetic applications in salons and spas.

General industrial quality control and laboratory inspection

In QC labs, Research and Development labs, and in general industrial inspection areas, the Wave-LED functions as a shared magnification tool with minimal learning curve. The combination of long-reach arm, compact head, and LED lighting is suitable wherever technicians need to quickly bring magnification to the work, rather than moving the work to a microscope. 

• Sampling and visual inspection of production parts, coupons, or test pieces.
• Failure analysis, incoming inspection, and troubleshooting of returned parts.
• Checking surface finishes, coatings, welds, and seals for defects.
• General laboratory bench work where occasional magnification and intense task lighting are required.

Features

• Large rectangular viewing area: Approximately 6.75 x 4.5 inch white crown glass lens provides room to see an entire region of interest without frequent repositioning.
• Choice of magnification: 3.5 diopter lens for a longer working distance and broader field, or 5 diopter lens for higher magnification when inspecting very small features.
• High-output LED illumination: Two dimmable LED modules consume roughly 13 watts total while delivering about 4600 lux at an 11 inch working distance, reducing energy use compared with fluorescent magnifiers.
• Neutral white color rendering: Approximately 4000 kelvin correlated color temperature and CRI around 80 support accurate color judgments on boards, components, and cosmetic surfaces.
• Selectable 3D lighting: Independent left and right LED banks allow users to switch between nearly shadow-free illumination and angled side lighting that emphasizes topography and fine defects.
• Internal spring-balanced K-arm: Heavy-duty 30 inch or 45 inch parallel arm with three pivots provides a long reach and stable positioning without the need for constant tightening.
• Fully enclosed neck: Smooth, enclosed neck design minimizes areas where debris can collect and makes cleaning easier in FOD-sensitive environments.
• Industrial construction: Steel arm and die-cast aluminum shade are built for long service life in production and lab settings.
• Step dimming and auto shut-off: Three-level dimming (approximately 0, 50, or 100 percent) plus an automatic shut-off after a preset interval help manage operator comfort and energy consumption.
• ESD and UV options: Dedicated ESD safe models for electrostatic-sensitive workspaces and UV variants designed for conformal coating and fluorescent inspection applications.
• Long-life LED platform: LED modules are designed for extended service life, reducing lamp replacement and downtime compared with older lighting technologies. 
• Made by Luxo: Wave-LED is part of the long-established Luxo and Glamox family of industrial magnifiers, manufactured to stringent quality standards.

Specifications

Variations

Dimensions

Optional Accessories

Wave-LED supports a set of optional accessories that extend its use into documentation, higher magnification, and specialized mounting applications. LabgearUSA can help you select accessories that match your workstation layout and inspection requirements.

• Secondary STAYS lenses in nominal 4, 6, and 10 diopter strengths for applications that periodically require higher magnification. 
• Weighted base for situations where clamping to the bench edge is not possible or where frequent relocation of the magnifier is required. Weighted bases and alternative mounts can simplify deployment on walls, mobile carts or specialized fixtures.
• Hard mounts (hold down screws) for benches, rails, and other support structures.
• Edge clamp mounts are suitable for most workbenches.
• BenchKam with selection of digital camera's with mounting brackets to attach camera systems to Wave-LED for image capture, enhancement, enlargement, and sharing.
• ESD safe for environments, equipment, and processes that require controlled static dissipation
• UV variant models for processes that require fluorescent inspection

Documentation

• Installation and Maintenance Manual for LED Luminaires – PDF

FAQs

Q1. What makes the Luxo Wave-LED different from standard round bench magnifiers?

A1. Wave-LED uses a rectangular glass lens and dual LED light banks to provide a wide, evenly lit field of view that follows the shape of circuit boards and elongated parts. The internal spring K-arm holds position without constant adjustment, and users can choose from standard, ESD safe, and UV variants. Compared with many round fluorescent magnifiers, Wave-LED delivers higher illuminance, lower energy use, and eliminates lamp replacement, while offering more control over light direction and shadowing.

Q2. How do I choose between 3.5 diopter and 5 diopter Wave-LED models?

A2. The 3.5 diopter Wave-LED provides moderate magnification with a longer working distance and wider field, which is ideal for general assembly and inspection where tools must easily fit under the lens. The 5 diopter models offer higher magnification and a shorter working distance, making them better for very small features, fine solder joints, and detailed defect analysis. Many users standardize on 3.5 diopter for everyday use and add 5 diopter units for stations focused on detailed inspection.

Q4. What mounting and arm length options are available for the Wave LED?

A4. The Luxo Wave-LED illuminated magnifier is supplied with a bench edge clamp as standard and can be configured with either a 30 inch or 45 inch internal spring K-arm. The 45 inch arm provides maximum reach across deep benches or fixtures, while the 30 inch arm conserves space on compact workstations and works well with Luxo's FE Weighted Base option when clamping to the bench is not practical. 

Q5. Can I increase magnification with secondary lenses on the Wave LED?

A5. Yes. The system is designed to accept clip-on STAYS secondary lenses with nominal 4, 6, or 10 diopter values that attach to the primary lens. These accessories allow occasional higher magnification without permanently sacrificing working distance on the main lens. For example, a user can work most of the time with a 3.5 diopter lens and add a secondary lens only when a closer look is required. [NOTE TO REVIEW: verify recommended secondary lens combinations for each primary lens]

Q6. How should I clean and maintain the Wave LED for long term performance?

A6. Routine care typically involves wiping the lens and housing with a clean, dry or slightly damp microfiber cloth and using a mild, neutral pH cleaner when needed. Strong solvents and highly alkaline cleaners should be avoided because they can damage plastic and coated surfaces over time. 

For Wave LED-ESD models, it is important to use a correct cleaning detergent to maintain the ESD functionality.  Examples of detergents are:

• ESD- SUPER CLEAN from ESD center AB part no: 81117 
• E2001/3GP from ACL Staticide part no: E2003GP 
• ANTISTAT from SCS (Desco) part no: ANTISTAT1QT

The cleaning frequency must be determined by measuring the magnifier with a surface resistance meter according to the applicable standards.

LED modules are designed for long service life, so maintenance is mostly limited to keeping optical and mechanical surfaces clean and ensuring the arm and clamp remain properly secured. For any electrical servicing or driver replacement, a qualified technician should follow the manufacturer installation and maintenance instructions.

Warranty

Luxo Wave-LED magnifiers are manufactured as industrial-grade luminaires, with a manufacturer 5 year warranty covering defects in materials and workmanship. 

For warranty or support questions, customers should contact LabgearUSA with the product model, catalog number, serial number if available, and a description of the issue. LabgearUSA will coordinate troubleshooting, replacement, or repair options with the manufacturer in accordance with the applicable warranty terms.

Ordering

When selecting a Luxo Wave-LED for your facility, start by choosing the magnification level and working distance, followed by arm length and any ESD or UV requirements. Decide whether a 3.5 diopter or 5 diopter lens best matches your tasks, and whether a 30 inch or 45 inch arm is needed to cover the full range of motion on your bench or fixture. Standard models are available in light gray, while ESD safe variants are supplied in black. UV and ESD plus UV versions should be specified where conformal coating inspection or fluorescent tracer work is part of the process. 

To place an order, select the desired catalog number from the configuration options and use the Add to Cart function for online purchasing, or request a formal quotation for multi-unit or contract orders. For current lead times and stock status, please contact LabgearUSA; many popular Wave-LED configurations are maintained in distribution but availability can vary.