MRC Labs External Control Hotplates

Product Description

The MRC Laboratory Digital Aluminum Large Hotplates are programmed and designed for heating of large surface with large loads.

Applications

• Heating TLC plates and evaporation,
• Heating aqueous reagents,
• Sample drying and evaporations,
• Distillations, extractions and digestions,
• Acid/base digestions-trace metal analysis,
• General reagent heating,
• Viscosity and solubility studies,
• Warning/curing applications-pastes, adhesives and solder,
• Reaction optimization,
• Safety thermostat,
• Semiconductor baking.

Features

• Easy to clean, chemical resistant top plate,
• Temperature can be displayed in °C or °F,
• Actual temperature can be read easily with digital set point,
• Precise temperature regulation by PID microprocessor controller all over the temperature range,
• Internal sensor to control temperature in plate surface or by thermocouple immersion probe of the sample,
• Power to heater shut down for safety, in case of broken sensor,
• Temperature range: above ambient to 300°C (optional 400°C),
• Uniform heat distributed on the entire surface by excellent heat conduction,
• Heat “ON” indicated by pilot lamp,
• The unit kept cool under continuous operation by special radiation shields,
• Support device at the rear of the base,
• An Optional external temperature sensor of 200mm length, 3.2mm diameter.

Specifications

• Input Power:  240VAC, North America plug (NEMA 6-20P)
• Temperature stability: ±1°

Options

• External temperature sensor of 200mm length, 3.2mm diameter,
• Increase maximum temperature to 400°C.

---